|
|
|
Products
|
|
|
|
|
|
|
|
Nylon and Polyurethane Tubes
-
BEAUFORT 9111
|
|
|
|
|
|
Heat and light stabilised semi-rigid lightweight nylon tubing. Can withstand temperatures of up to 100°C without affecting performance.
Can be used with a variety of coupling types.
|
|
|
Specification
|
Fully complies to BS 5409 : Parts 1 & 2
|
|
Remarks
|
Made from Virgin polymer Type 12.
# Natural is not heat & light stabilised
# Maybe subject to minimum quantity.
|
|
Application
|
Pneumatic and hydraulic controls, lubricant and fuel tubing.
|
|
Temperature
|
-35°C to +110°C.
Up to +140ºC intermittantly
|
| ID | OD | WP | Coil Sizes | Colour |
| mm | mm | psi | M | |
| 4 | 2.5 | 648 | 30 | NAT,BLACK |
| 5 | 3 | 703 | 30 | NAT,BLACK |
| 6 | 4 | 559 | 30 | NAT,BLACK |
| 8 | 5.5 | 518 | 30 | NAT,BLACK |
| 8 | 6 | 398 | 30 | NAT,BLACK |
| 10 | 7 | 495 | 30 | NAT,BLACK |
| 10 | 8 | 312 | 30 | NAT,BLACK |
| 12 | 10 | 256 | 30 | NAT,BLACK |
| 16 | 13 | 290 | 30 | NAT,BLACK |
| 18 | 14 | 353 | 30 | NAT,BLACK |
| 28 | 22 | 337 | 30 | NAT,BLACK |
|
|
|
BEAUFORT BEAUFORT 9100
Flexible nylon tubing with high mechanical strength. Resistant to a wide variety of chemicals, liquids and gases. Suitable for push-in, compression and barbed fittings. Very low moisture absorption and has a mirror smooth finish.
|
|
|
BEAUFORT BEAUFORT 9101
Heat and light stabilised semi-rigid lightweight tubing. Can be used at high temperatures without compromising performance. Can be used with a variety of coupling types.
|
|
|
BEAUFORT BEAUFORT 9110
Flexible lightweight nylon tubing possessing good mechanical strength and resistant to a wide range of chemicals, liquids and gases. Can be used with push-in, compression and spigot type fittings.
|
|
|
BEAUFORT BEAUFORT 9111
Heat and light stabilised semi-rigid lightweight nylon tubing. Can withstand temperatures of up to 100°C without affecting performance.
Can be used with a variety of coupling types.
|
|
|
BEAUFORT BEAUFORT 9112
Pre-coiled nylon tubing fitted with 360°C swivel male couplings at both ends, complete with spring guards. Working lengths of 2.5, 5 and 10 metres. Can be made in polyurethane. Retains memory after use.
|
|
|
BEAUFORT BEAUFORT 9720
Extruded from highly flexible polyurethane compound. This tube has been specifically designed for use with push fit couplings and is used for pneumatic lines.
|
|
|
|